When you looking for pop socket under 5 dollars, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable pop socket under 5 dollars is not an easy task. In this post, we show you how to find the right pop socket under 5 dollars along with our top-rated reviews. Please check out our suggestions to find the best pop socket under 5 dollars for you.

Best pop socket under 5 dollars

Product Features Editor's score Go to site
6pcs 3M Sticky Adhesive Replacement Parts for Socket Base, VOLPORT 1.38 Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs Pops VHB Sticker Pads for Cell Magnetic Phone Car Mount Holder 6pcs 3M Sticky Adhesive Replacement Parts for Socket Base, VOLPORT 1.38 Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs Pops VHB Sticker Pads for Cell Magnetic Phone Car Mount Holder
Go to amazon.com
Universal Phone Grip Holder, Expanding Grip Socket for Cellphones, Rotation Pop Grip Holder for iPhone, iPad and Tablet Universal Phone Grip Holder, Expanding Grip Socket for Cellphones, Rotation Pop Grip Holder for iPhone, iPad and Tablet
Go to amazon.com
Very High Bond Sticky Adhesive, AZXYI 6 Pack Socket Sticky Adhesive Replacement Kit, Double-Sided Stickers for Collapsible Grips Socket Base Very High Bond Sticky Adhesive, AZXYI 6 Pack Socket Sticky Adhesive Replacement Kit, Double-Sided Stickers for Collapsible Grips Socket Base
Go to amazon.com
8 Pack Sticky Adhesive Compatible with Socket Base, PKYAA Double-Sided Replacement Tape for Collapsible Grip & Stand Back, 4pcs Sticker Pads for Car Magnetic Phone Holder 8 Pack Sticky Adhesive Compatible with Socket Base, PKYAA Double-Sided Replacement Tape for Collapsible Grip & Stand Back, 4pcs Sticker Pads for Car Magnetic Phone Holder
Go to amazon.com
Lljin 1 Pcs Metal Ring Stand Universal Applied Mobile Phone Stand 360 Degree Rotate (Rose Gold) Lljin 1 Pcs Metal Ring Stand Universal Applied Mobile Phone Stand 360 Degree Rotate (Rose Gold)
Go to amazon.com
Indian Mandala Elephant - DesignSkinz Premium Decal Sticker Skin-Kit for Smartphone Extendable Grip & Stand / Fits Pop Sockets Indian Mandala Elephant - DesignSkinz Premium Decal Sticker Skin-Kit for Smartphone Extendable Grip & Stand / Fits Pop Sockets
Go to amazon.com
Sticky Adhesive Replacement for Socket Mount Base, VOLPORT 5 Pcs 1.38 Inch VHB 3M Dots Adhesive Double Sided Tape, Updated High Temperature Heat Resistant Strong Sticker Pads for Pops Phone Grip Stand Sticky Adhesive Replacement for Socket Mount Base, VOLPORT 5 Pcs 1.38 Inch VHB 3M Dots Adhesive Double Sided Tape, Updated High Temperature Heat Resistant Strong Sticker Pads for Pops Phone Grip Stand
Go to amazon.com
[8 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount [8 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount
Go to amazon.com
Pack of 16 Easy To Change Stickers for Pop Mount Holder Socket Pack of 16 Easy To Change Stickers for Pop Mount Holder Socket
Go to amazon.com
PKYAA 6 Pack Sticky Adhesive Compatible with Socket Base, 2 Pack Sticker Pads for Socket Mount Base, 4 Pack Universal Magic Plate Replacement Kits for Car Magnetic Phone Holder PKYAA 6 Pack Sticky Adhesive Compatible with Socket Base, 2 Pack Sticker Pads for Socket Mount Base, 4 Pack Universal Magic Plate Replacement Kits for Car Magnetic Phone Holder
Go to amazon.com
Related posts:

1. 6pcs 3M Sticky Adhesive Replacement Parts for Socket Base, VOLPORT 1.38 Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs Pops VHB Sticker Pads for Cell Magnetic Phone Car Mount Holder

Feature

VERY VERY IMPORT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-come up-press red film back-peel again. 2. Adhesive can't hold cell phone, please don't not stick adhesive on very soft, rugged, texture surface' phone case, it may not stick well. 3. Last but the most important rule, wait 24 hours after stuck. 4. Please contact us immediately if you have any problems, we are here.
LIVE TO COMPATIBLE WITH: VOLPORT new top 3M sticky adhesive flex tape pack is exclusively designed to compatible with back&base; extra strong and easy to change skin gel for grip . big stickey adhesive fit perfect base&back; small sticky adhesive compatible with mount's back. Best cover replacement parts ever, great but cheap magic gift for boys and girls, man and woman.
6 PIECES BIG ADHESIVE STIKER BACK BASE: We adopt original 3m VHB super adhesive gel, which is 40% stronger than ordinary black glue, high temperature and low temperature resistance. Big stickey adhesive great compatible with base&backing.
2 PIECES SMALL ADHESIVE STIKER COMPATIBLE WITH PHONE CAR MOUNT HOLDER BASE: Small sticky adhesive can be use on the bottom of dashboard 360 Rotation magnet car phone mount holder, dash cam mount ect, which is stable even in bumpy roads. Please clean the adhesive surface with alcohol pad before use
WIDE APPLICATIONS: Volport universal accessories can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace. Volport universal accessories comes with 12-months warranty, if you have any question, do not hesitate to contact us.

Description

VOLPORT Sticky Adhesive, Perfect Popsocket Replacement for Your iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6, iPhone 6 plus, iPhone 6S, iPhone 6S Plus, iPhone 5S SE 5C, for Samsung Galaxy Note 8, S8, S8 Plus, S7, S7 Edge Note 8 5 4 3 A9 A8, LG, Nexus, HTC, LG, Nokia, Google Pixel, one plus ect.

INSTRUCTION:

1)IF YOU USE ON POPSOCKET:
Base Gel Replace: Choose 35mm sticky adhesive.

2)IF YOU USE ON DASHBOARD CAR MOUNT:
Base Gel Replace: Choose 23mm sticky adhesive.

NOTE:

1)3m sticky adhesive can not be used repeatedly, please sealed preservation
2)Please remove the original residual glue and clean the adhesive surface with alcohol pad first.
3)If adhesive hard to peel off,please press it back once and try peel again, don't touch the gel with your hand after peel off.
4)It would be better to wait 24 hours to use after stuck, the longer of the time the stronger of the sticky adhesive.

PACKAGE INCLUDED:

635mm 3M adhesive sticker
223mm 3M adhesive sticker
2alcohol pack
1instruction manual

2. Universal Phone Grip Holder, Expanding Grip Socket for Cellphones, Rotation Pop Grip Holder for iPhone, iPad and Tablet

Feature

[Provide Convenience]phone holder can provide you with convenience and free your hands.Stick the car mount on the dashboard. Then hang your phone on the mount.You can text with one hand, snap better photos.Great for selfies, video chats, watching videos, web surfing, texting, gaming, group photos, and Skype.
[Super Stickiness]A strong 3M adhesive that fits snugly on your item and won't slip.
[Appearance is Beautiful and Stylish]A variety of styles of mobile phone holders are available for you to choose from. Their stylish look makes your phone stand out.
[Good Value for Money]phone holder has a high price/performance ratio.
[Compatibility] All the equipment you want to paste.(including the iPhone 6/6s/6 Plus/6s Plus/7/7 Plus/8/8 Plus/X/XS/XR/XS MAX and Galaxy S8/S9 as well as phones by HTC, LG, Huawei, and more)

Description

Universal Phone Grip Holder, Expanding Grip Socket for Cellphones, Rotation Pop Grip Holder for iPhone, iPad and Tablet

3. Very High Bond Sticky Adhesive, AZXYI 6 Pack Socket Sticky Adhesive Replacement Kit, Double-Sided Stickers for Collapsible Grips Socket Base

Feature

Compatible With Socket BaseAZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 1.4 inches) with pressure-sensitive adhesive on two sides for attaching socket base to your smartphone.
Strong Sticky Adhesive AZXYI double-sided bonding adhesive successfully bonds various surfaces for permanent and repositionable applications. Extra strong sticky adhesive compatible with collapsible phone grip socket.
6 Pcs Alcohol Prep PadsTo maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck.
Very High BondThese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.
DurabilityThese Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Description

This popular sticky adhesive replacement kit will provide a good resilient bonding solution in just about what you can dream up.

[Package Includes]

The Very High Bond adhesive circle pads -

6Pcs, Diameter: 1.4 inches (35mm), thickness: 0.03 inch (0.8 mm)

Alcohol Prep Pads - 6Pcs

[General Information]

The double-side Very High Bond adhesive pad is a three layer material consisting of a core layer of closed cell acrylic foam that is placed between two layers of paper and film release liners. The kraft paper release liners resist wrinkling and curling, you can more easily grip the liner edge for removal.The white film liners add strength in high speed processing and dispensing.

Surface contact is fundamental to adhesive performance. To maximize adhesive contact on a surface:

1. It must be dry and free of contaminates.

2. Firm pressure must be applied to increase the flow and contact of the adhesive with the substrate.

3. Time and temperature will increase typically further the surface contact and adhesion values.

[How to Use the Very High Bond Sticker]

1. Use Alcohol Prep Pads to wipe the bonding surface and let it dry.

2. Remove the paper release liner and attach the Very High Bond adhesive pad to the adhesive surface, and apply a certain pressure thereto for more secure bonding.

3. Remove the white release paper, then paste the material to be applied, and apply a certain pressure to it to make it fit.

4. It would be better to wait 24 hours to use, time will increase the adhesion values.

Note: To remove air bubbles, please attach for one end first, and then slowly pressed to the other end to reduce the chance of bubble generation.

4. 8 Pack Sticky Adhesive Compatible with Socket Base, PKYAA Double-Sided Replacement Tape for Collapsible Grip & Stand Back, 4pcs Sticker Pads for Car Magnetic Phone Holder

Feature

PKYAA 3M Sticky Adhesive Replacement Superior PerformancePKYAA offer original 3M VHB super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant. PKYAA sticky adhesive is extremely compatible with the base and back.
8Pcs 1.38" 3M VHB Adhesive Compatible with Out-StandPKYAA offers 8Pcs 3M VHB double side sticky adhesive compatible with out-stand, the 3M adhesive is 35mm(1.38") and fit out-stand base perfectly.
4Pcs 0.9" 3M VHB Adhesive Compatible with Out-Stand MountsThe 23mm(0.9") double side sticky adhesive can be used on the bottom of Out-Stand car mounts, magnetic car mounts, instrument panel cam holders, gps holders and vent mount to maintain stability even on rough roads.
2Pcs Alcohol PadAfter replacing the 3M Adhesive or before applying the Round Plate, clean the surface with a wet Alcohol Pad and dry the surface with a dry Alcohol Pad for better adhesion.
Service and WarrantyPKYAA offer 12 months worry-free warranty and friendly service. If you are not satisfied with your orders, please contact us by email, we'll help you to replace or refund.

Description

VHB is fit for bonding many kinds of material with flat hard surface like sealed glass, composites, wall, office table, metal, etc.

The 3M adhesive is good and strong, stick well on your phone or case.

Each metal plate has been polished softly and carefully for truly smooth edges.


How To Use

1) Make sure the the surface of both parts you want to glue together is flat.

2) Please remove the original residual glue and clean the adhesive surface with alcohol pad first.

3) If adhesive hard to peel off,please press it back once and try peel again,Peel the film from one side and apply to the chosen spot. Wait for about 30 min.

4) It would be better to wait 24 hours to use after stuck, the longer of the time the stronger of the sticky adhesive.


Package Detail

835mm(1.38in) 3M round double side sticky adhesive

423mm(0.91in) 3M round double side sticky adhesive

2Alcohol pack

5. Lljin 1 Pcs Metal Ring Stand Universal Applied Mobile Phone Stand 360 Degree Rotate (Rose Gold)

Feature

💕💕 Universal for iPhone, Samsung,E-readers etc. all kinds of mobile phone
💕💕 The ring can be revolved in either horizontal direction 360 or vertical direction 180
💕💕 ring stand for cell phone skull clear fynix fyn-pr-21 degree rotation holder finger gift iphone 6s cross cat car design cute butterfly 8plus with bling love anarona pink transparent mount black elephant rose kate spade white case magnetic gold blue pack owl fidget spinner case-mate
💕💕 phones and tablets selfie light youtube video wonder woman unicorn magnet shape diamond galaxy 9+ universal & flip cheap cactus cyber garden plus spigen men avengers silver purple in yemen red heart harley quinn girly letter k flower ohio state glitter mobile desk lazy kick button lamp b-land portable tripod grip me stabilizer
💕💕 charging treasure small night jeep samdi circle clip leegoal animal soft toy seat boost lg power x case/ multi function ipad support pop osmo base dji gimbal automobile gravity cradle dashboard istuck up hands rotate earphone i stick foldable aluminum alloy adjustable combo softball evermarket out expanding iphones nano zulu wood organizer tall tape air vent bracket sticker socket zilu barcelona gps - recording

Description


💕💕Features:
💕💕Universal for iPhone, Samsung,E-readers etc. all kinds of mobile phone.
💕💕The ring can be revolved in either horizontal direction 360 or vertical direction 180.
💕💕Convenient for typing message, playing games or watching movies.
💕💕It can convenient take photos or use all the functions of Slide Mobile and tablet PC with one hand.
💕💕It can be used many times, just put the paste surface to the water, then clean and dry it, thus adhesion force can recover.
💕💕Use it
💕💕1. Clean dirt and dust of smart phone/tablet at the part to be pasted;
💕💕2. Remove the protective film of the ring, and past it up to smart phone/tablet;
💕💕3. Press softly by hand to ensure stickiness;
💕💕4. When need to remove the ring, please shell off from edge firstly, then uncover completely. Reusable, Non-remaining trace, a New Powerful Washable Adhesive
💕💕Material: metal
💕💕Color: gold, rose gold, silver, black
💕💕Included:
💕💕1 Ring Stand

6. Indian Mandala Elephant - DesignSkinz Premium Decal Sticker Skin-Kit for Smartphone Extendable Grip & Stand / Fits Pop Sockets

Feature

Black Smartphone Extendable Grip & Stand NOT INCLUDED.
Easy-to-Apply, Bubble-FREE installation.
Fits the Smartphone Extendable Grip & Stand Smartphone stand.

Description

Add style to your Smartphone Extendable Grip & Stand with DesignSkinz! Made from a premium vinyl, these skinz can take a beating.
  • Black Smartphone Extendable Grip & Stand NOT INCLUDED.
  • Easy-to-Apply, Bubble-FREE installation.

7. Sticky Adhesive Replacement for Socket Mount Base, VOLPORT 5 Pcs 1.38 Inch VHB 3M Dots Adhesive Double Sided Tape, Updated High Temperature Heat Resistant Strong Sticker Pads for Pops Phone Grip Stand

Feature

Designed for Socket Base: The strong genuine VHB 3M sticky adhesive pads is designed for socket bottom. 1.38inch 3M red dots adhesive perfect fit collapsible cell phone grip back. This round double sided adhesive replacement parts can greatly extend the life of your expanding phone grip holder.
Updated Version: We updated the adhesive because of summer coming. This original circle 3M sticky adhesive tape can resist 100+C. You can use it without worry on summer. What's more, according to customers request, 2 more alcohol pads provided than other sellers, more convenient for you to clean.
Important Note: 1. We use a stronger 3m double sided tape, so it difficult to tear off. Just peed it off like this: try to peel it - press it back - try to peel it again; 2. Please press it 10-30 seconds firmly; 3. After you stuck, please wait 24 hours to use your collapsible phone grip.
4 Packs Alcohol Pads: Come with 4 pack alcohol pads help you clean the area where you'd like to place. Be sure the mounting surface and socket base you have cleaned before you stick the adhesive.
Widely Applications: Replacement adhesive pads can be used in home, bathroom, mirror, refrigerator, bed, wall, locker, office, etc. But, it can NOT be used in silicone case.

8. [8 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount

Feature

[8 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount.
[Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect.
[Extra Strong & Durability Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70 F and 100F.
[Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides.
[Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long.

Description

NOTE:
1.Make sure the temperature is between 70 and 100F (21 and 38C)
2. Make sure the surface is flat, hard and dry before intalling.
3.Do not reuse the double sided adhesive after removing it.

Double-Sided Adhesive
Multi Purpose Application
The below rules you have to follow to get it working longer.
a) Make sure the surface at least as the room temperature or a little higher
b)Clean the surface with alcohol pad until dry
c)Peel off the yellow paper and stick it to the mount/popsocket
d) Press firmly for 12 seconds
e)Then peel off the red paper, and also press firmly for 12 seconds
f)Wait 24 hours to use after installation

Package includes,
6* 1.35inch for Pop Socket Sticky Adhesive
2* 0.9inch for Pop Socket Car Mount Adhesive
2* alcohol pad
1* instruction manual

9. Pack of 16 Easy To Change Stickers for Pop Mount Holder Socket

Feature

Replacement Adhesive Pads for Expanding Phone Stand and Grip / for Wall Hooks
Premium Replacement Adhesive Pads for all expanding phone stand and other phone stand mount holder
Widely Used:It can stick to the surface of a lot of materials, such as wood, metals, glass, papers, paints, and many plastics and fabrics
Strong Pad Mounting Adhesive

10. PKYAA 6 Pack Sticky Adhesive Compatible with Socket Base, 2 Pack Sticker Pads for Socket Mount Base, 4 Pack Universal Magic Plate Replacement Kits for Car Magnetic Phone Holder

Feature

6Pcs 35mm(1.38") 3M VHB Adhesive Compatible with Pop-out-StandPKYAA offers 6pcs 3M VHB double side sticky adhesive compatible with pop-out-stand, the 3M adhesive is 35mm(1.38") and fit pop-out-stand base perfectly.
2Pcs 23mm(0.91") 3M VHB Adhesive Compatible with Pop out Stand MountThe 23mm sticky adhesive can be used on the bottom of magnetic car mounts, instrument panel cam holders, gps holders and vent mount to maintain stability even on rough roads.
2Pcs 40mm(1.57") & 2Pcs 30mm(1.18") Round Plate Compatible with Pop-Out-StandThe 40mm round plate fit the pop-out-stand surface outside grip cap, the 30mm metal dics fit pop-out-stand inside grip cap, the mellow is very smooth, without any burrs, after installation, it can be used for any magnetic car mount. Of course you can also paste these plate directly on your phone.
2Pcs Alcohol PadAfter replacing the 3M Adhesive or before applying the Round Plate, clean the surface with a wet Alcohol Pad and dry the surface with a dry Alcohol Pad for better adhesion.
Service and WarrantyPKYAA offer 12 months worry-free warranty and friendly service. If you are not satisfied with your orders, please contact us by email, we'll help you to replace or refund.

Description

VHB is fit for bonding many kinds of material with flat hard surface like sealed glass, composites, wall, office table, metal, etc.

The 3M adhesive is good and strong, stick well on your phone or case.

Each metal plate has been polished softly and carefully for truly smooth edges.


How To Use

1) Make sure the the surface of both parts you want to glue together is flat.

2) Please remove the original residual glue and clean the adhesive surface with alcohol pad first.

3) If adhesive hard to peel off,please press it back once and try peel again,Peel the film from one side and apply to the chosen spot. Wait for about 30 min.

4) It would be better to wait 24 hours to use after stuck, the longer of the time the stronger of the sticky adhesive.


Package Detail

635mm(1.38in) 3M round double side sticky adhesive

223mm(0.91in) 3M round double side sticky adhesive

240mm(1.57in) Black circle mount metal plates

230mm (1.18in) Black circle mount metal plates

242mm(1.65in) Clear protective film

2Alcohol pack

Conclusion

All above are our suggestions for pop socket under 5 dollars. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using pop socket under 5 dollars with us by comment in this post. Thank you!
Jaime Gordon